Skip to main content

NYC DCWP Home Improvement Contractor License #2136696-DCWP

Questions and Answers

Short, plain answers about insulating a NYC home: how the work is done, which materials we use, what it costs, and how to check any contractor. If your question isn't here, call 929-401-8115.

Last reviewed:

The process

How does drill-and-fill wall insulation work?

We drill a small hole into each wall cavity, the hollow space between two studs, from outside or inside. A hose then blows insulation, usually cellulose, into the cavity until it's packed full, and the hole is closed.

The U.S. Department of Energy calls drill-and-fill a common way to insulate the walls of older homes (Source: U.S. Department of Energy, checked Oct 23, 2026).

Do you drill from the outside or the inside?

It depends on the wall: how it's built, its outside finish, safe access, and whether it may contain asbestos. On wood-frame houses with siding, we usually drill from outside, after a few pieces of siding are lifted or removed. Brick and stucco walls are done from inside (Source: U.S. Department of Energy, checked Oct 23, 2026). You'll know which before you sign anything.

Do you remove drywall or plaster?

No. Drill-and-fill goes in through small holes, so your drywall or plaster stays in place. If we work from inside, each wall gets a row of small holes, which we close and skim-coat so they're ready for paint. We don't paint.

How are the holes patched?

Outside, we drill under the siding, so the holes don't show once the siding is back in place. Inside, each hole is closed and skim-coated, which means covered with a thin, smooth layer of filler, so it's ready for paint. We don't paint, so plan for painting after the job.

How long does the job take?

It depends on the house and the work. A home assessment usually takes 1–1.5 hours. Most wall jobs take up to 2 days, and most attic jobs 1 day. Air sealing is usually done as part of the attic job. On its own, for example at the rim joists in a basement, it can take less than a day. Your contract lists the start and finish dates for your job.

Is it messy, and do I need to leave?

There's some dust, but we keep it under control: we protect the work area and clean up at the end of the job. You can usually stay home while we work. Before the job, we agree with you on which rooms we need to get into, and when.

What happens during a home energy assessment?

We talk with you, walk through your home and look at the attic, walls, basement and heating system. Whenever we can, we run a blower door test, which shows how leaky the house is. We may also use an infrared camera, which shows where heat escapes. An assessment may also include a check of the heating and cooling equipment, a gas leak test and a ventilation check (Source: U.S. Department of Energy, checked Oct 23, 2026). A visit usually takes 1–1.5 hours.

How do I get ready for an assessment?

Make a list of problems you've noticed, like drafty rooms, cold floors or condensation on windows, and have a few recent energy bills handy if you can (Source: U.S. Department of Energy, checked Oct 23, 2026). Clear a path to the attic, the basement and your heating equipment.

What do I get after the assessment?

A written scope: what we found, the work we propose, the materials, the R-values where they matter, and the price. You decide what happens next. Nothing is installed until you sign a contract.

Attics and air sealing

How much attic insulation does a NYC home need?

It depends on how much insulation the attic has now and how much space there is. New York City uses climate zone 4A (Source: NYC Buildings, checked Oct 23, 2026), and ENERGY STAR publishes how much attic insulation it recommends for that zone (Source: ENERGY STAR, checked Oct 23, 2026). In tight spaces like cocklofts, the depth of the space sets the limit. Your written scope shows the R-value we plan for your attic.

What is a cockloft, and can you insulate it?

A cockloft is the low, closed space between the top-floor ceiling and the flat roof of many NYC row houses. It's hard to reach, but insulation can often be blown into it through a few openings. We reach it from inside the house, not through the roof. The assessment shows whether yours can be insulated.

Why seal the attic before adding insulation?

Insulation slows heat, but air still flows through gaps around pipes, wires, chimneys and lights. Sealing those gaps first stops the air, so the insulation on top can do its job (Source: U.S. Department of Energy, checked Oct 23, 2026). It's much harder to seal later, once insulation covers the attic floor.

Will insulation block my attic vents?

It shouldn't. In a vented attic, we put in baffles first: simple channels that keep insulation away from the vents, so air can still move under the roof (Source: U.S. Department of Energy, checked Oct 23, 2026).

What is air sealing?

Air sealing closes the gaps that let air leak in and out of your house: around pipes, wires, chimneys and recessed lights, behind kneewalls, and where the house meets its foundation. Small gaps get caulk or canned spray foam, and larger gaps spray foam or fiberglass. Chimneys and flues get hot, so the gaps around them need heat-resistant materials (Source: ENERGY STAR, checked Oct 23, 2026). We use the foam only to seal gaps, not as insulation.

What is a blower door test?

It's a test with a strong fan fitted into an outside doorway. The fan pulls air out of the house, so outside air rushes in through every gap. A pressure gauge measures how leaky the house is, and the test helps find where the leaks are (Source: U.S. Department of Energy, checked Oct 23, 2026).

What does an infrared camera show?

It shows the surface temperature of walls and ceilings as an image. Cold patches can mean missing insulation. During a blower door test, air leaks show up as dark streaks (Source: U.S. Department of Energy, checked Oct 23, 2026). It shows where to look; it doesn't see inside the wall.

Can a house be sealed too tight?

A house needs fresh air, and gas appliances need to vent safely. Sealing can change how a furnace, boiler or water heater vents, so we test these appliances for safe venting before and after we seal (Source: ENERGY STAR, checked Oct 23, 2026). If a home ends up needing more fresh air, the usual fix is a ventilation fan.

Materials and safety

Should I choose cellulose or fiberglass?

Both work well when they're dense-packed (Source: U.S. Department of Energy, checked Oct 23, 2026). We mostly use dense-pack cellulose, and sometimes fiberglass. Cellulose is made mostly from recycled paper and is common in upgrades of existing homes. Fiberglass makes little dust while it's installed and doesn't burn (Source: U.S. Department of Energy, checked Oct 23, 2026). Your contract names the material for your house (Source: NYC DCWP, checked Nov 5, 2026).

Is blown-in insulation safe?

Installed correctly, it's a well-established material for homes. Cellulose is treated to resist fire, mold and pests, and fiberglass doesn't burn (Source: U.S. Department of Energy, checked Oct 23, 2026). The rules that matter: keep it dry, and keep it away from chimneys, metal flues and old knob-and-tube wiring. That's why we look for moisture, old wiring and materials that may contain asbestos before any work. A look can't tell whether something contains asbestos (Source: U.S. EPA, checked Oct 27, 2026), so we don't touch anything that might.

What R-value will my walls get?

It depends on how deep your walls are and on the material, because insulation can only fill the space that's there. Your written scope shows the R-value we plan for your walls. R-value measures how well insulation slows heat; higher is better.

Can you insulate a brick row house?

Sometimes. Some brick row houses have solid masonry walls with no hollow space to fill. Others have a framed wall behind the brick, which can often be insulated from inside (Source: U.S. Department of Energy, checked Oct 23, 2026). In row houses, insulating the attic or cockloft and sealing air leaks may help more. The assessment shows which kind of wall you have.

What if my house has old knob-and-tube wiring?

Old knob-and-tube wiring, found in houses wired before about 1930, can be a fire hazard in contact with insulation (Source: ENERGY STAR, checked Oct 23, 2026). Walls with live knob-and-tube wiring shouldn't be insulated until an electrician replaces it (Source: U.S. Department of Energy, checked Oct 23, 2026). We check for it before any work, and those walls wait until the wiring is replaced.

My house was built before 1978. What about lead paint?

Federal rules require firms that are paid to disturb painted surfaces in homes built before 1978 to be certified and to follow lead-safe work practices (Source: U.S. EPA, checked Oct 23, 2026). Ask any contractor whether the job will disturb paint and whether their firm is EPA Lead-Safe Certified.

What work don't you do?

We insulate homes, seal air leaks and do home energy assessments. We don't remove asbestos, mold or lead paint, repair electrical wiring or install spray foam insulation. If we find asbestos, mold or wiring problems, we don't touch them, and the work waits until a qualified professional has checked or fixed them.

Cost, programs and financing

How much does wall insulation cost in NYC?

It depends on the house. We give you a written quote after the assessment, based on how many walls or how much attic space needs work, the material, how we reach it, and any repairs needed first. You never pay for work you didn't agree to in writing.

Can I get help paying for insulation?

Some households can. NYSERDA (the New York State Energy Research and Development Authority) runs EmPower+, a program for income-eligible owners and renters of 1–4 family homes. NYSERDA, not contractors, decides who qualifies. For the rules and how to apply, see NYSERDA's EmPower+ page or call NYSERDA at 1-866-NYSERDA (1-866-697-3732).

Who decides if I qualify for a program?

NYSERDA does. For its programs, NYSERDA reviews each application and decides who is eligible. A contractor can't promise that you'll qualify. If someone tells you you're already approved, or asks for money to “lock in” a program, check them first.

Do you offer financing?

No. NYC rules don't let home improvement contractors set up financing or help you get a loan (Source: NYC DCWP, checked Nov 5, 2026). You pay us after the job is done, and we don't ask for a deposit.

Licenses and trust

Are you licensed and insured?

Danmir LLC is licensed by NYC DCWP as a home improvement contractor, license #2136696-DCWP. You can look it up yourself on DCWP's license search. Our insurance is listed on our licenses and disclosures page.

Are you the government or a utility?

No. Danmir LLC is an independent licensed contractor. We are not NYSERDA, a utility, or a government agency. If someone says they're calling from the government or your utility to sell you insulation, check them first.

How do I check a contractor who calls or knocks?

Ask for their NYC home improvement license number and look it up on DCWP's license search. If they mention EmPower+, check NYSERDA's list of participating contractors. Don't give your Social Security number or bank details to anyone who calls or knocks. More tips are on our Is it legit? page.

Can I cancel after I sign a contract?

Yes. NYC rules let you cancel a home improvement contract until midnight of the third business day after you sign it. The contract has to come with a Notice of Cancellation form, and work can't start until that time has passed (Source: NYC DCWP, checked Nov 5, 2026).

Do you work with renters?

Yes, with the building owner's agreement. If you rent, you can book the assessment yourself once your landlord has agreed to it. The contract is signed with the owner of the building, or with someone the owner has authorized. Condos, co-ops and buildings with 5 or more units we take case by case.

Sources

Where the facts on this page come from, and when we last checked them.

  1. Insulation and Air-Sealing Essentials, U.S. Department of Energy. Checked October 23, 2026.
  2. Measure Guideline: Wall Air Sealing and Insulation Methods in Existing Homes, U.S. Department of Energy. Checked October 23, 2026.
  3. Home Energy Assessments, U.S. Department of Energy. Checked October 23, 2026.
  4. 2025 NYC Energy Conservation Code, Chapter R3, NYC Buildings. Checked October 23, 2026.
  5. Recommended Home Insulation R-Values, ENERGY STAR. Checked October 23, 2026.
  6. Blown Insulation in Existing Attics, U.S. Department of Energy. Checked October 23, 2026.
  7. Attic Air Sealing Project, ENERGY STAR. Checked October 23, 2026.
  8. Energy Renovations: Insulation, U.S. Department of Energy. Checked October 23, 2026.
  9. Inspection Checklist: Home Improvement Contractors, NYC DCWP. Checked November 5, 2026.
  10. Protect Your Family from Exposures to Asbestos, U.S. EPA. Checked October 27, 2026.
  11. Lead Renovation, Repair and Painting Program, U.S. EPA. Checked October 23, 2026.

Still have a question?

Call 929-401-8115 or book an assessment. We'll answer it, plainly.